Write a customer review. See all customer images. Read reviews that mention boat hook plastic hook works well works great dock floats pole pulling grab bed fell reach rope tip truck hooks lines telescoping collapse dropped. Showing of reviews. Top Reviews Most recent Top Reviews. There was a problem filtering reviews right now. Please try again later. OK boat hook, but somehow I missed that the hook was flexible. We aren't able to hook onto cleats to pull us in because the hook bends.
This works great for my needs. I no longer own a boat, but I do have a pick up truck where stuff slides forward in the bed. The tonneau cover makes it difficult to reach the stuff at the front of the bed, but this hook allows me to grab onto stuff and pull it to the rear of the bed. The new slips at our revamped marina are too wide for my old non-extending boat hook to reach the dock lines.
Trying to do that, once or twice I almost fell off the boat while reaching out as far as possible fazing about for the line. This hook folds up compactly enough to be stored on hooks in the cockpit, like the old non-extending one did, but also stretches out far enough to snare those dock lines with ease. I like that it floats.
Frequently bought together
I like that it extends and retracts easily. I like the apparent quality of the boat hook. I have not actually taken it out in the boat yet because it was ordered too late in the year for me to take the boat out again but I will certainly have it in the boat next spring when I go fishing.
I know this is suppose to be for boats but it's hard to reach the vents for adjustment.
This guy is almost perfect for that though I wish the hook end had different attachements so I could use a smaller hook. I use it to grab my dock lines and havent had a single problem. Ok for grabbing a rope or really light duty applications. Hook is like hard rubber. Spend the extra for a good one. When you need it One person found this helpful. Feels sturdy and light weight. You have to be sure to really tighten when extended or it will collapse when you use it to push off the dock and such. See all reviews. Amazon Giveaway allows you to run promotional giveaways in order to create buzz, reward your audience, and attract new followers and customers.
Learn more about Amazon Giveaway. Set up a giveaway. Customers also shopped for. Pages with related products.
Best Rated in Boat Hooks & Helpful Customer Reviews - f.e-safety.com.ua
See and discover other items: There's a problem loading this menu right now. Learn more about Amazon Prime. Get fast, free shipping with Amazon Prime. Get to Know Us. English Choose a language for shopping. Inspect the helm station from the back or underside, to ensure the area underneath is clear of obstructions, and has sufficient room for protruding bolts and wires. Once you've chosen the location, either use the binnacle template included with the fishfinder, or use the binnacle itself as a template, to mark the location of the mounting holes with a pencil.
Drill out the mounting holes with your power drill, running it at full speed at all times a slowly turning drill bit is more likely to catch the gelcoat's edges, causing it to splinter and chip. Before you drill one out, inspect the console to make sure there isn't already a hole from a prior gear installation, which you can re-use — the fewer holes in your helm, the better. Assuming you don't get off so easy, you will need to drill a hole directly behind the binnacle mount. Make sure it's large enough to accept all of the unit's wires, and before you drill, put the binnacle and fishfinder temporarily in place to ensure there's enough clearance between the mount and the hole for the wires to pass through, without making any sharp bends.
Otherwise, the wires might rub against the edge of the hole and chafing could become a problem down the road. With all holes drilled, run a bead of silicon sealant around the base of the binnacle mount and around each hole. Put the binnacle in place, and before running the bolts through, give each a dab of silicon on their ends.
Now secure the bolts to the helm with Nylock aircraft-style locking nuts. Find the best location for your fishfinder. Depending on the length of the supplied wires, you may or may not need to lengthen or shorten the power leads. If you need to lengthen them, be sure to stick with the proper color-coding and tinned-copper wire boat cable of the manufacturer's recommended gauge.
Wire-to-wire connections should be made with crimped barrel connectors — never solder — and should be protected by heat-shrink tubing. And whatever you do, don't cut out the manufacturer's included in-line fuse — get rid of it and you might fry the unit, as well as invalidating the warranty. Push the power leads down through the exit hole you drilled, until the plug has enough freedom to reach the unit without extra wiring exposed outside of the helm.
Then run the wire to your helm's fuse block.
Step 1: Installing The Binnacle Mount
Secure the wires every 18 inches with tie-wraps or cushioned clamps, while making sure to minimize droops and slack. If your fuse block has male spade terminals, crimp female spade connectors to the ends of the power leads and protect the connections with heat-shrink tubing. If it has screw-type terminals, use ring connectors of the appropriate size.
- Step 2: Running The Power Leads.
- christian online dating sites.
- Customers who bought this item also bought.
- carbon-14 dating essay.
- free kundali match making for marriage.
- How To Install A Fishfinder - BoatUS Magazine?
- are lia and jc still dating 2020.
Leave the terminal ends disconnected, while you complete the installation. Finding the perfect location is a must before you begin the actual installation. Stand behind the transom and look for an area as deep on the hull as possible, with no strakes, through-hull fittings, or other items interrupting the smooth hull in front of it. Anything that disturbs water flow will create turbulence, which degrades the fishfinder's performance.
Using a pencil, mark the location of the bracket's mounting holes. Before you actually mount the transducer, however, now's the time to run the transducer's wire to the dash. Do so after the mounting procedure, and you might ruin the sealant's grip by accidentally jerking on the wire.
If your boat had an old fishfinder with a transom mount transducer, cut the transducer off the end and use the old wire to draw the new one through the wiring chase.
How To Install A Fishfinder
If not, you'll have to start from scratch by using a wire fish to pull the new transducer wire and plug through. Once you've pulled all of the wire to the helm and routed it up through the hole you made, coil any extra line inside the helm, and secure it with tie-wraps or cushioned clamps. Never cut the transducer wire down to size; the new connections you'll have to make at the plug can create additional resistance in the wires, and the fishfinder's performance will suffer. Don't bundle the transducer wire with the engine's wiring harness or VHF cable; they can cause electrical interference that will degrade the unit's performance.
Using the markings you made earlier on the transom, drill pilot holes for the bracket's mounting screws with your power drill. While holding the bracket in place, screw in the mount. The last thing you want are holes in your transom that let water soak through.